Key Fob and Chip Key Replacement in Bellevue
Why a chip key costs more than a hardware-store copy, and what to have in hand before you call.
A guide to deadbolt locks for Bellevue homes: single vs double cylinder, ANSI grades, strike plates, throw length, smart deadbolts and when to call a locksmith.
A single-cylinder deadbolt has a key outside and a thumb turn inside. It's the common choice, and the safe one for getting out quickly in a fire.
A double-cylinder deadbolt needs a key on both sides. It stops someone breaking the glass beside a door and reaching in. It also traps you if the key isn't nearby. Check local fire code before fitting one, and keep the key in the lock while anyone is home.
Keypad and smart deadbolts swap keys for codes or a phone. Handy for families, renters, short-term guests. They need batteries and most keep a mechanical key as backup.
ANSI/BHMA grading runs from Grade 1 (commercial strength) to Grade 3 (light residential). For exterior doors on a Bellevue house, Grade 1 or 2 is the sensible floor. The grade is usually printed on the packaging. If it isn't, that tells you something.
Most forced entries don't defeat the bolt. They split the door frame. The strike plate on many homes is held by two short screws in soft trim wood. Replace them with 3-inch screws that reach the wall stud, or fit a reinforced strike box. It's one of the least expensive upgrades in home security.
The bolt should extend a full inch into the frame. Some older deadbolts, especially in mid-century houses around Lake Hills and Eastgate, throw shorter. If the bolt doesn't fully extend, the door or strike is out of line. A locksmith can adjust it.
Swapping a deadbolt into an existing hole is a straightforward job. Fitting one into a door with no hole takes drilling and mortising, which is why new lock installation is priced higher. Ask the dispatcher for a starting price, and the locksmith confirms it before work starts. The New Customers coupon covers 10% off purchased locks and deadbolts.
Why a chip key costs more than a hardware-store copy, and what to have in hand before you call.
Lockouts, snapped keys, forced doors. What gets handled, what a reputable locksmith refuses, and what to do first.
The questions the dispatcher asks, the ID check at the door, and how to avoid a surprise on the bill.
Call and hear a starting price for your job before anyone is sent.
Bellevue, WA 98004 dispatch location. Calls referred to independent local locksmith contractors.